Cisco Cisco ASR 5000
AAA Server Group Configuration Mode Commands
▀ radius accounting
▄ Command Line Interface Reference, StarOS Release 18
168
This CLI is independent of the APN or subscriber profile configuration
aaa secondary-group
aaa_group_name
.
interim interval interim_interval
Specifies the time interval, in seconds, for sending accounting INTERIM-UPDATE records.
interim_interval
must be an integer from 50 through 40000000.
Default: Disabled
Important:
If RADIUS is used as the accounting protocol for the GGSN product, other commands are used to
trigger periodic accounting updates. However, these commands would cause RADIUS STOP/START packets to be sent
as opposed to INTERIM-UPDATE packets. Also, note that accounting interim interval settings received from a
RADIUS server take precedence over those configured on the system.
as opposed to INTERIM-UPDATE packets. Also, note that accounting interim interval settings received from a
RADIUS server take precedence over those configured on the system.
max-outstanding max_messages
Specifies the maximum number of outstanding messages a single AAA Manager instance will queue.
max_messages
must be an integer from 1 through 4000.
Default: 256
max-pdu-size octets
Specifies the maximum sized packet data unit which can be accepted/generated, in bytes (octets).
octets
must be an integer from 512 through 2048.
Default: 2048
max-retries max_retries
Specifies the maximum number of times communication with a AAA server will be attempted before it is
marked as “Not Responding” and the detect dead server consecutive failures count is incremented.
marked as “Not Responding” and the detect dead server consecutive failures count is incremented.
max_retries
must be an integer from 0 through 65535.
Default: 5
Once the maximum number of retries is reached this is considered a single failure for the consecutive failures
count for detecting dead servers.
Once the maximum number of retries is reached this is considered a single failure for the consecutive failures
count for detecting dead servers.
max-transmissions max_transmissions
Sets the maximum number of transmissions for a RADIUS accounting message before the message is
declared as failed.
declared as failed.
max_transmissions
must be an integer from 1 through 65535.
Default: Disabled
timeout timeout_duration
Specifies the duration to wait for a response from a RADIUS server before retransmitting a request.
timeout_duration
must be an integer from 1 through 65535.
Default: 3
Usage
Use this command to configure RADIUS accounting options according to the RADIUS server used for the
context.
context.
Example
The following command configures the accounting timeout parameter to
16
seconds.