Cisco Cisco ASR 5000
Exec Mode Commands (D-S)
monitor protocol ▀
Command Line Interface Reference, StarOS Release 18 ▄
4155
PHS (Payload Header Suppression)
PPPOE
RTP (IMS)
RTCP (IMS)
LMI
NPDB (IMS)
SABP (Femto-UMTS)
OCSP (X.509)
Once the protocol has been selected by entering its associated number, the utility monitors and displays every
relative protocol message transaction.
Protocol monitoring is performed on a context-by-context-basis. Therefore, the messages displayed are only
those that are transmitted/received within the system context from which the utility was executed.
For additional information on using the monitor utility, refer to the System Administration Guide.
relative protocol message transaction.
Protocol monitoring is performed on a context-by-context-basis. Therefore, the messages displayed are only
those that are transmitted/received within the system context from which the utility was executed.
For additional information on using the monitor utility, refer to the System Administration Guide.
Caution:
Protocol monitoring can be intrusive to subscriber sessions and could impact system performance.
Therefore, it should only be used as a troubleshooting tool.
Example
The following command opens the protocol monitoring utility for SIP (IMS) =
37
:
monitor protocol 37