Cisco Cisco ASR 5000
Exec Mode show Commands (M-P)
▀ show pdif-service
▄ Command Line Interface Reference, StarOS Release 18
4836
show pdif-service
Displays configuration information about Packet Data Interworking Function (PDIF) services configured on the system.
Product
PDIF
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show pdif service { all [ counters ] | name name [ counters ] | statistics [ name name |
peer-address address ] } [ | { grep grep_options | more } ]
peer-address address ] } [ | { grep grep_options | more } ]
all [ counters ]
Displays configuration information and statistical counters for all PDIF services in the system.
name name [ counters ]
Displays configuration information and statistical counters for an existing PDIF service specified as an
alphanumeric string of 1 through 63 characters.
alphanumeric string of 1 through 63 characters.
statistics [ name name | peer-address address ]
name
name
: Displays service statistics for a an existing PDIF service specified as an alphanumeric string of 1
through 63 characters.
peer-address
address
: Displays service statistics for a peer server IP address specified in IPv4 dotted-
decimal notation.
| { grep grep_options | more }
Pipes (sends) the output of the command to the command specified. You must specify a command to which
the output will be sent.
For details on the usage of
the output will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section in the
Command Line Interface Overview chapter.
Usage
Use this command to display configuration information and statistics about PDIF services on the system.
Example
The following example displays configuration information about a PDIF service named
pdif23
:
show pdif service name pdif23
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.