Cisco Cisco ASR 5000
Exec Mode show Commands (M-P)
▀ show port
▄ Command Line Interface Reference, StarOS Release 18
4846
table
Displays information for all physical ports on rear-installed cards with physical interfaces.
transceiver slot/port
Displays diagnostic information for all SFP+ transceivers connected to a specified subscriber traffic port on
the MIO card.
the MIO card.
utilization table
[ verbose ]
Shows average port utilization in Mbps. The output is a table that lists the current utilization average, a 5-
minute average, and a 15-minute average, for all enabled ports.
The
minute average, and a 15-minute average, for all enabled ports.
The
verbose
option displays port utilization with kilobyte accuracy using decimal points.
| { grep grep_options | more }
Pipes (sends) the output of the command to the command specified. You must specify a command to which
the output will be sent.
For details on the usage of
the output will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section in the
Command Line Interface Overview chapter.
Usage
Display port information for troubleshooting of network communications by viewing statistics and
configuration information for physical ports.
configuration information for physical ports.
Example
The following displays detailed information for port 1 in slot 17:
show port info 17/1show port table
The following displays information for the data link port 33/1:
show port datalink counters 33/1
show port npu counters 33/1
The following displays detailed information for port 11 in slot 5:
show port info 5/11
show port table
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.