Cisco Cisco ASR 5000
HNB-CS Network Configuration Mode Commands
ranap reset ▀
Command Line Interface Reference, StarOS Release 18 ▄
6425
ranap reset
Configures various Radio Access Network (RAN) Application Part reset procedure parameters for CS network
association in an HNB access network.
association in an HNB access network.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > HNB-CS Network Configuration
configure > cs-network cs_instance
Entering the above command sequence results in the following prompt:
[local]host_name(config-cs-network-instance_id)#
Syntax
ranap reset { ack-timeout timer_value | guard-timeout g_timer | hnbgw-initiated | max-
retransmissions retries | use-actual-plmn }
retransmissions retries | use-actual-plmn }
default ranap reset { ack-timeout | guard-timeout | hnbgw-initiated | max-retransmissions
| use-actual-plmn }
| use-actual-plmn }
no ranap { hnbgw-initiated | use-actual-plmn }
default
Resets the RANAP RESET parameters in HNB-CS Network configuration instance.
no
Disables the RANAP RESET procedure related parameters in an HNB-CS Network configuration instance.
ack-timeout
timer_value
Sets the timer value (in seconds) to wait for Reset Acknowledge from MSC. This is used during HNB-GW
initiated RANAP RESET procedure in HNB-CS Network configuration instance.
initiated RANAP RESET procedure in HNB-CS Network configuration instance.
timer_value
is an integer value from 5 through 10. Default: 10
guard-timeout
g_timer_value
Sets the timer value (in seconds) to send Reset Acknowledge to MSC. After this duration the HNB-GW sends
RESET-ACK to MSC. This is used during MSC initiated RANAP RESET procedure in HNB-CS Network
configuration instance.
RESET-ACK to MSC. This is used during MSC initiated RANAP RESET procedure in HNB-CS Network
configuration instance.
g_timer_value
is an integer value from 5 through 10. Default: 10
hnbgw-initiated
Enables the HNB-GW Initiated RANAP RESET procedures. Default: Disabled