Cisco Cisco ASR 5000
IuPS Service Configuration Mode Commands
service-request-follow-on ▀
Command Line Interface Reference, StarOS Release 18 ▄
6881
service-request-follow-on
Instructs the SGSN not to release an Iu immediately.
Product
SGSN
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > IuPS Service Configuration
configure > context context_name > iups-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx-iups-service)#
Syntax
[ default | no ] service-request-follow-on
default
Resets the configuration to the default, this function is enabled.
no
Disables this function so that Iu is released without waiting for the Iu-Hold-Timer to expire.
Usage
For an Iu established as the result of a Service Request (signaling), the SGSN, by default, waits for the Iu-
Hold-Timer to expire.
Use this command with the ‘no’ prefix to disable this function.
Use this command with the ‘default’ prefix or without any prefix if the configuration was modified
previously with by
Hold-Timer to expire.
Use this command with the ‘no’ prefix to disable this function.
Use this command with the ‘default’ prefix or without any prefix if the configuration was modified
previously with by
no service-request-follow-on
.
Example
Disable this function to wait for the Iu-Hold-Timer to expire:
no service-request-follow-on
Enable this function if it was previously disabled:
service-request-follow-on