Cisco Cisco Packet Data Gateway (PDG)
APN Configuration Mode Commands
▀ mediation-device
▄ Command Line Interface Reference, StarOS Release 18
1406
mediation-device
Enables the use of a mediation device and specifies the system context to use for communicating with the device.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
mediation-device [ context-name context_name ] [ delay-GTP-response ] [ no-early-PDUs ] [
no interims ] +
no interims ] +
[ default | no ] mediation-device
+
Indicates that more than one of the options can be specified with a single execution of the command.
default
Changes the mediation device to no context-name configured and restores the mediation device’s default
properties.
properties.
no
Deletes the mediation-device configuration.
context-name
context_name
Configures the mediation VPN context for this APN as an alphanumeric string of 1 through 79 characters that
is case sensitive. If not specified, the mediation context is the same as the destination context of the
subscriber. Default: The subscribers destination context.
is case sensitive. If not specified, the mediation context is the same as the destination context of the
subscriber. Default: The subscribers destination context.
delay-GTP-response
When enabled, delays the CPC response until an Accounting Start response is received from the mediation
device. Default: Disabled
device. Default: Disabled
no-early-pdus
Specifies that the system delays PDUs from the MS until a response to the GGSN accounting start request is
received from the mediation device. The PDUs are queued, not discarded. Default: Disabled
received from the mediation device. The PDUs are queued, not discarded. Default: Disabled