Cisco Cisco Packet Data Gateway (PDG)
APN Configuration Mode Commands
▀ nai-construction
▄ Command Line Interface Reference, StarOS Release 18
1416
nai-construction
Configures the Network Access Identifier (NAI) construction parameters on a per-APN basis only, rather than by per-
aaa-group when constructed NAI authentication is enabled.
aaa-group when constructed NAI authentication is enabled.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
nai-construction { imsi | msisdn } [ override-null-username ] [ encrypted password
encrypt_password | use-shared-secret-password | password password ]
encrypt_password | use-shared-secret-password | password password ]
no nai-construction
no
Disables the NAI construction at the APN level.
imsi
Enables NAI construction using IMSI for authentication for a user. GGSN constructs NAI using IMSI when
no user-name is received. This is the default setting. Default: Enabled
no user-name is received. This is the default setting. Default: Enabled
msisdn
Enables NAI construction using Mobile Station International ISDN Number (MSISDN) for authentication for
a user. GGSN constructs NAI using MSISDN when no user-name is received.
a user. GGSN constructs NAI using MSISDN when no user-name is received.
override-null-username
Enables NAI construction using IMSI/MSISDN for authentication for a user or when empty user name is
received.
received.
encrypted password
Specifies an encrypted password is to be used for this NAI-constructed user.
string
is an alphanumeric
string of 0 through 63 characters.