Cisco Cisco Packet Data Gateway (PDG)
Call Control Profile Configuration Mode
authenticate all-events ▀
Command Line Interface Reference, StarOS Release 18 ▄
1933
authenticate all-events
Allows the operator to quickly define authentication procedures, based on limited parameters, for all types of events.
Product
MME
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
authenticate all-events [ access-type { gprs | umts } | frequency frequency [ access-type
{ gprs | umts } ] ]
{ gprs | umts } ] ]
no authenticate all-events [ access-type { gprs | umts } ]
no
Disables the specified authentication configuration in the call control profile.
remove
Removes the specified authentication configuration from the call control profile configuration file.
access-type type
One of the following must be selected to identify the type of network access if the
access-type
keyword is
included in the command:
gprs
umts
The
access-type
keyword can be included with any of the other three keywords available with the
authenticate all-events
command.
frequency frequency
This keyword defines 1-in-N selective authentication for all types of subscriber events. If the frequency is set
for 12, then the service skips authentication for the first 11 events and authenticates on the 12th event.
for 12, then the service skips authentication for the first 11 events and authenticates on the 12th event.
frequency
must be an integer from 1 to 16.