Cisco Cisco Packet Data Gateway (PDG)
Call Control Profile Configuration Mode
▀ hss
▄ Command Line Interface Reference, StarOS Release 18
1992
hss
This command defines the HSS message specific configurations. Using this command the operator can control GPRS
Subscription Data Requests in Update Location Request (ULR) messages to the HSS.
Subscription Data Requests in Update Location Request (ULR) messages to the HSS.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
hss message update-location-request gprs-subscription-indicator { never | non-epc-ue }
remove hss message update-location-request gprs-subscription-indicator
remove
Use this keyword to remove the configuration to GPRS Subscription Data requests in the ULR messages to
the HSS.
the HSS.
message
Use this keyword to define the HSS message specific configurations.
update-location-request
Use this keyword to specify Update Location Request (ULR) message configuration.
gprs-subscription-indicator
The HSS includes the GPRS Subscription data in the ULA command if
gprs-subscription-indicator
keyword is set in the ULR message. By default, GPRS Subscription Data is always requested from the HSS.
never
Use this keyword to specify that GPRS Subscription Data should never be requested from the HSS.
non-epc-ue
Use this keyword to specify that GPRS Subscription Data should be requested from the HSS when the UE is
not an EPC-capable device.
not an EPC-capable device.