Cisco Cisco Packet Data Gateway (PDG)
Call Control Profile Configuration Mode
▀ samog-s2a-gtpv2
▄ Command Line Interface Reference, StarOS Release 18
2096
samog-s2a-gtpv2
Enables SaMOG to forward the User Equipment's (UE) Identity information over the GTPv2 interface.
Important:
This command is available only when the SaMOG General license (supporting both 3G and 4G) is
configured. Contact your Cisco account representative for more information on license requirements.
Product
SaMOG
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
samog-s2a-gtpv2 send imeisv value ue-mac [ filler filler_value ]
no samog-s2a-gtpv2 send imeisv
no
If configured, disables SaMOG from forwarding the UE Identity information over the GTPv2 interface.
filler filler_value
Specifies the 2 bytes of padding to be used with the UE's MAC address for the IMEIsV IE value.
filler_value
must be a hexadecimal number from 0x0 through 0xFFFE.
Usage
Use this command to enable SaMOG to forward the User Equipment's (UE) Identity information over the
GTPv2 interface.
GTPv2 interface.
Example
Configure SaMOG to forward the UE identity with a padding value of
0xFEFE
:
samog-s2a-gtpv2 send imeisv value ue-mac filler 0xFEFE