Cisco Cisco Packet Data Gateway (PDG)
Context Configuration Mode Commands E-H
edr-module active-charging-service ▀
Command Line Interface Reference, StarOS Release 18 ▄
2431
edr-module active-charging-service
Enables the creation, configuration, or deletion of the Event Data Record (EDR) module for this context. In releases
prior to 15.0, the SGSN re-used the existing ‘EDR” module for generating event logs which is primarily used for
charging records. But from release 15.0 onwards, the session-event module is used by SGSN for event logging. For
more information see the
prior to 15.0, the SGSN re-used the existing ‘EDR” module for generating event logs which is primarily used for
charging records. But from release 15.0 onwards, the session-event module is used by SGSN for event logging. For
more information see the
session-event-module
command.
Product
ACS
GGSN
HA
LNS
PDSN
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
[ no ] edr-module active-charging-service [ charging | reporting ]
no
Removes the EDR module configuration for the current context.
charging
Enables the EDR module for charging EDRs that are stored in the /records/edr directory.
reporting
Enables the EDR module for reporting EDRs that are stored in the /records/redr directory.
Usage
Use this command to create the EDR module for the context, and configure the EDR module for active
charging service records. You must be in a non-local context when specifying this command, and you must
use the same context when specifying the UDR module command.
If this CLI command is configured without the
charging service records. You must be in a non-local context when specifying this command, and you must
use the same context when specifying the UDR module command.
If this CLI command is configured without the
charging
or
reporting
keywords, by default the EDR
module is enabled for charging EDRs.
On entering the command with the
On entering the command with the
charging
keyword or without any keywords, the CLI prompt changes to:
[context_name]hostname(config-edr)#
On entering the command with the
reporting
keyword, the CLI prompt changes to: