Cisco Cisco Packet Data Gateway (PDG)
Context Configuration Mode Commands N-R
radius accounting ip remote-address ▀
Command Line Interface Reference, StarOS Release 18 ▄
2707
radius accounting ip remote-address
This command configures IP remote address-based RADIUS accounting parameters.
Product
PDSN
HA
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
[ no ] radius accounting ip remote-address { collection | list list_id }
no
Removes earlier configuration for the specified keyword.
collection
Enables collecting and reporting Remote-Address-Based accounting in RADIUS Accounting. This should be
enabled in the AAA Context. It is disabled by default.
enabled in the AAA Context. It is disabled by default.
list list_id
Enters the Remote Address List Configuration Mode. This mode configures a list of remote addresses that
can be referenced by the subscriber's profile.
can be referenced by the subscriber's profile.
list_id
must be an integer from 1 through 65535.
Usage
This command is used as part of the Remote Address-based Accounting feature to both configure remote IP
address lists and enable the collection of accounting data for the addresses in those lists on a per-subscriber
basis.
Individual subscriber can be associated to remote IP address lists through the configuration/specification of
an attribute in their local or RADIUS profile. (Refer to the
address lists and enable the collection of accounting data for the addresses in those lists on a per-subscriber
basis.
Individual subscriber can be associated to remote IP address lists through the configuration/specification of
an attribute in their local or RADIUS profile. (Refer to the
radius accounting
command in the Subscriber
Configuration mode.) When configured/specified, accounting data is collected pertaining to the subscriber’s
communication with any of the remote addresses specified in the list.
Once this functionality is configured on the system and in the subscriber profiles, it must be enabled by
executing this command with the collection keyword.
communication with any of the remote addresses specified in the list.
Once this functionality is configured on the system and in the subscriber profiles, it must be enabled by
executing this command with the collection keyword.
Example
The following command enables collecting and reporting Remote-Address-Based accounting in RADIUS
Accounting:
Accounting:
radius accounting ip remote-address collection