Cisco Cisco Packet Data Gateway (PDG)
CSCF Crypto Template Configuration Mode Commands
▀ ipsec
▄ Command Line Interface Reference, StarOS Release 18
3118
ipsec
Configures parameters for the 3GPP/3GPP2 P-CSCF security associations within this crypto template.
Product
SCM
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF Crypto Template Configuration
configure > context context_name > crypto template template_name ipsec-3gpp-cscf
Entering the above command sequence results in the following prompt:
[context_name]host_name(cfg-crypto-tmpl-ims-cscf-tunnel)#
Syntax
ipsec transform-set list list_name
transform-set list name
transform-set
: Specifies a context-level IPSec security association transform set to be used for deriving
3GPP/3GPP2 P-CSCF security associations from this crypto template.
list
list_name:
A space separated list of 3GPP/3GPP2 P-CSCF security association transform sets.
list_name
must be an existing 3GPP/3GPP2 P-CSCF transform set and be from 1 to 127 alpha and/or
numeric characters.
Important:
A minimum of one transform set is required. A maximum of four transform sets may be specified.
Usage
Use this command to configure parameters for the 3GPP/3GPP2 P-CSCF security associations within this
crypto template.
crypto template.
Example
The following command configures the 3GPP/3GPP2 P-CSCF transform set list name to
ikev1list1
:
ipsec transform-set list ikev1list1