Cisco Cisco Packet Data Gateway (PDG)
CSCF Peer Servers Configuration Mode Commands
server ▀
Command Line Interface Reference, StarOS Release 18 ▄
3187
server
Configures the name, IP address, and port of servers belonging to this peer server and enters the Server Configuration
Mode.
Mode.
Product
SCM
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF Peer Servers Configuration
configure > context context_name > cscf peer-servers server_name type { bgcf | ibcf |
icscf | mgcf | mrcf | pcscf | scscf | sip-as }
icscf | mgcf | mrcf | pcscf | scscf | sip-as }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-cscf-peer-servers-group)#
Syntax
server name { address ip_address | domain domain_name } [ port number ] [ transport { tcp
| udp } ] [ weight number ]
| udp } ] [ weight number ]
no server name
no
Removes the specified server from the group.
name
Specifies a name for the server.
name
must be from 1 to 79 alpha and/or numeric characters in length.
address ip_address
Specifies the IP address of the server.
ip_address
is expressed in dotted decimal notation for IPv4 or colon
notation for IPv6.
domain domain_name
Specifies the domain name of the peer server.
domain_name
must be from 1 to 255 alpha and/or numeric
characters in length.
port number
Specifies the port number of the server.
number
must be an integer value from 1 to 65535.
transport { tcp | udp }
Specifies the transport type (TCP or UDP).