Cisco Cisco Packet Data Gateway (PDG)
EDR Format Configuration Mode Commands
▀ attribute
▄ Command Line Interface Reference, StarOS Release 18
3636
attribute
This command allows you to specify the fields and their order in EDRs.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > EDR Format Configuration
active-charging service service_name > edr-format format_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-acs-edr)#
Syntax
attribute attribute { [ format { MM/DD/YY-HH:MM:SS | MM/DD/YY-HH:MM:SS:sss | MM/DD/YYYY-
HH:MM:SS | MM/DD/YYYY-HH:MM:SS:sss | YYYY/MM/DD-HH:MM:SS | MM/DD/YYYY-HH:MM:SS:sss |
YYYYMMDDHHMMSS | YYYYMMDDHHMMSSsss | seconds } ] [ localtime ] | [ { ip | tcp } { bytes |
pkts } { downlink | uplink } ] priority priority }
HH:MM:SS | MM/DD/YYYY-HH:MM:SS:sss | YYYY/MM/DD-HH:MM:SS | MM/DD/YYYY-HH:MM:SS:sss |
YYYYMMDDHHMMSS | YYYYMMDDHHMMSSsss | seconds } ] [ localtime ] | [ { ip | tcp } { bytes |
pkts } { downlink | uplink } ] priority priority }
no attribute attribute [ { ip | tcp } { bytes | pkts } { downlink | uplink } ] [ priority
priority ]
priority ]
no
If added previously, removes the specified attribute from the EDR format.
attribute
Specifies the attribute.
attribute
must be one of the following:
Attributes
Description
bandwidth-policy
This attribute reports the bandwidth policy name of subscriber.
Bandwidth policy can be configured or applied to subscriber by —
Bandwidth policy can be configured or applied to subscriber by —
binding with APN (static)
binding with Rulebase (static)
receiving from AAA server (dynamic)
Important:
This attribute field is customer specific. For more information, contact
your Cisco account representative.
radius-called-
station-id
station-id
This attribute reports the Called Station ID of the mobile handling the flow.
radius-calling-
station-id
station-id
This attribute reports the Calling Station ID of the mobile handling the flow.