Cisco Cisco Packet Data Gateway (PDG)
Ethernet Port Configuration Mode Commands
shutdown ▀
Command Line Interface Reference, StarOS Release 18 ▄
3775
shutdown
Terminates all processes supporting the port or blocks the shutting down of the port. Conversely, the port is enabled
with the use of the
with the use of the
no
keyword.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Ethernet Port Configuration
configure > port ethernet slot_number/port_number
Entering the above command sequence results in the following prompt:
[local]host_name(config-port-slot_number/port_number)#
Syntax
[ no ] shutdown
no
Enables the port and places it in service.
Usage
Shut down a port prior to re-cabling and/or other maintenance activities.
For Release 15.0 and higher, this command powers down the port on FELC, GELC and QGLC line cards
(ASR 5000). This command already powers down the ports on MIO/UMIO cards (ASR 5500).
To enable a port (bring it into service) use the
For Release 15.0 and higher, this command powers down the port on FELC, GELC and QGLC line cards
(ASR 5000). This command already powers down the ports on MIO/UMIO cards (ASR 5500).
To enable a port (bring it into service) use the
no
keyword.
Example
Use the following command to disable the port:
shutdown
Use the following command to enable the port for service:
no shutdown