Cisco Cisco Packet Data Gateway (PDG)
ACS Charging Action Configuration Mode Commands
tft packet-filter ▀
Command Line Interface Reference, StarOS Release 18 ▄
433
tft packet-filter
This command allows you to specify the packet filter to use in TFTs sent to the MS.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Charging Action Configuration
active-charging service service_name > charging-action charging_action_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-charging-action)#
Syntax
[ no ] tft packet-filter packet_filter_name
no
If previously configured, removes the specified packet filter from the current charging action.
packet_filter_name
Specifies the packet filter to add/remove from the current charging action.
packet_filter_name
must be the name of a packet filter, and must be an alphanumeric string of 1 through
63 characters.
Usage
Use this command to configure the packet filter to be sent to the MS. Up to eight packet filters can be
specified in a charging action.
specified in a charging action.
Example
The following command configures the packet filter
filter23
to be sent to the MS:
tft packet-filter filter23