Cisco Cisco Packet Data Gateway (PDG)
Global Configuration Mode Commands (L-S)
▀ logging display
▄ Command Line Interface Reference, StarOS Release 18
5448
logging display
Configures the level of detail for information to be logged.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
logging display ( event-verbosity ( min | concise | full } | pdu-data { none | hex | hex-
ascii } | pdu-verbosity pdu_level }
ascii } | pdu-verbosity pdu_level }
event-verbosity ( min | concise | full }
Specifies the level of verboseness to use in logging of events as one of:
min
: displays minimal detail.
concise
: displays summary detail.
full
: dislays all details.
pdu-data { none | hex | hex-ascii }
Specifies output format for packet data units when logged as one of:
none
: output in raw format.
hex
: displays output in hexadecimal format.
hex-ascii
: displays output in hexadecimal and ASCII similar to a main-frame dump.
pdu-verbosity
pdu_level
Specifies the level of verboseness to use in logging of packet data units as an integer from 1 through 5, where
5 is the most detailed.
5 is the most detailed.
Usage
Tune the level of information to be logged so as to avoid flooding a log file with information which is not
useful or critical.
useful or critical.
Example
The following sets event logging to display the maximum amount of detail.
logging display event-verbosity full