Cisco Cisco Packet Data Gateway (PDG)
Global Configuration Mode Commands (L-S)
snmp authentication-failure-trap ▀
Command Line Interface Reference, StarOS Release 18 ▄
5539
snmp authentication-failure-trap
Enables or disables the SNMP traps for authentication failures.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
[ no ] snmp authentication-failure-trap
no
Disables SNMP traps for authentication failures. When omitted, SNMP traps for authentication failures will
be generated.
be generated.
Usage
Disables authentication failure traps if they are not of interest. At this time the option may be changed to
support trouble shooting.
By default SNMP authentication failure traps are disabled.
support trouble shooting.
By default SNMP authentication failure traps are disabled.