Cisco Cisco Packet Data Gateway (PDG)
GTPP Server Group Configuration Mode Commands
▀ gtpp data-record-format-version
▄ Command Line Interface Reference, StarOS Release 18
6160
gtpp data-record-format-version
Encodes the data record format version. The version indicates the 3GPP release version.
Important:
This CLI command is applicable only to custom24 standard and custom35 GTPP dictionaries for S-
GW.
Product
S-GW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
[ no ] gtpp data-record-format-version string
no
Specifies that the default data record format will be encoded based on the GTPP dictionary being used.
gtpp data-record-format-version string
Specifies the 3GPP release version to be encoded.
string
must be in the format a.b (for example 10.10).
This is applicable only for custom24 and custom35 GTPP dictionaries for S-GW. The entry can be from 1 to
1023 alphanumeric characters.
1023 alphanumeric characters.
Usage
Use this command to support a configurable multiple data record format version only for Custom24 and
Custom35 dictionaries. The entry can be from 1 to 1023 alphanumeric characters. This is useful when the
value of the data record format version is taken according to the dictionary being used. If only the default
configuration is used, a version mismatch causes the GTPP request to be discarded while using R10
attributes.
Custom35 dictionaries. The entry can be from 1 to 1023 alphanumeric characters. This is useful when the
value of the data record format version is taken according to the dictionary being used. If only the default
configuration is used, a version mismatch causes the GTPP request to be discarded while using R10
attributes.
Example
This example configures the data record format version 10.10 to be encoded.
gtpp data-record-format-version 10.10