Cisco Cisco Packet Data Gateway (PDG)
HSGW Service Configuration Mode Commands
▀ a11-signalling-packets
▄ Command Line Interface Reference, StarOS Release 18
6344
a11-signalling-packets
Enables the DSCP marking feature for IP headers carrying outgoing A11-signalling A11 packets (such as RRP, RU,
SU).
SU).
Product
HSGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > HSGW Service Configuration
configure > context context_name > hsgw-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-hsgw-service)#
Syntax
a11-signalling-packets ip-header-dscp value
[ default | no ] a11-signalling-packets ip-header-dscp
default
Restores the specified parameter to its default setting of 0x0.
no
Disables the specified functionality.
ip-header-dscp value
Configures the QoS Differentiated Services Code Point (DSCP) marking for IP header encapsulation.
value
: Represents the DSCP setting as the first six most-significant bits of the ToS field. It can be
configured to any hex value from 0x0 through 0x3F. Default is 0x0.
Usage
Use this command to enable or disable the DSCP marking feature for IP headers carrying outgoing A11-
signalling A11 packets. DSCP marking is disabled by default.
signalling A11 packets. DSCP marking is disabled by default.
Example
The following command configures the HSGW service to support DSCP marking for IP headers on A11
packets in outgoing A11-signalling traffic:
packets in outgoing A11-signalling traffic:
a11-signalling-packets ip-header-dscp 0x21