Cisco Cisco Packet Data Gateway (PDG)
SCCP Network Configuration Mode Commands
hop-count ▀
Command Line Interface Reference, StarOS Release 18 ▄
8435
hop-count
This command specifies the hop count for this SCCP network.
Product
SGSN
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SCCP Network Configuration
configure > sccp-network id_number
Entering the above command sequence results in the following prompt:
[local]host_name(config-sccp-network-sccp_id)#
Syntax
hop-count hop_cnt
default hop-count
default
Resets the hop-count value to the system default of 5.
hop_cnt
The hop count to assign to this SCCP network.
hop_cnt:
enter an integer from 1 to 15.
Usage
Use this command to define the hop count for this SCCP network.
Example
The following command sets the hop count to 3:
hop-count 3