Cisco Cisco Packet Data Gateway (PDG)
S-GW Service Configuration Mode Commands
accounting stop-trigger ▀
Command Line Interface Reference, StarOS Release 18 ▄
8715
accounting stop-trigger
Configures the trigger point for accounting stop CDR. Default is on session deletion request.
Product
S-GW
SAEGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > S-GW Service Configuration
configure > context context_name > sgw-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sgw-service)#
Syntax
accounting stop-trigger custom
default accounting stop-trigger
default
Accounting stop CDR triggered once Delete Session/Delete Bearer Request is received at S-GW.
custom
Synchronizes the timestamp in the SGWRECORD CDR and PGWRECORD CDR if the MME cannot reach
the UE. When configured, the SGW will also trigger the Accounting stop CDR after receiving the answer
(accept for Delete session request) from the MME.
the UE. When configured, the SGW will also trigger the Accounting stop CDR after receiving the answer
(accept for Delete session request) from the MME.
Usage
Use this command to specify the trigger point for accounting stop CDR for this S-GW service.
Example
The following command specifies that accounting stop trigger would be at response of session deletion:
accounting stop-trigger custom