Cisco Cisco Packet Data Gateway (PDG)
SLs Service Configuration Mode Commands
▀ bind
▄ Command Line Interface Reference, StarOS Release 18
8742
bind
Binds the SLs service to a local SCTP IP address, configures the SCTP port number, and associates an SCTP parameter
template. This interface is used by the SLs service to communicate with the E-SMLC.
template. This interface is used by the SLs service to communicate with the E-SMLC.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > SLs Service Configuration
configure > context context_name > sls-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sls-service)#
Syntax
bind { ipv4-address ipv4_address_value1 [ ipv4-address ipv4_address_value2 ] | ipv6-
address ipv6_address_value1 [ ipv6-address ipv6_address_value2 ] [ port port_num ] }
sctp-template sctp_param_template_name
address ipv6_address_value1 [ ipv6-address ipv6_address_value2 ] [ port port_num ] }
sctp-template sctp_param_template_name
no bind
no
Removes the interface binding from this SLs service.
ipv4-address ipv4_address_value1 [ ipv4-address ipv4_address_value2 ]
Specifies the IPv4 address of an interface in the current context through which communication with the E-
SMLC occurs.
A second IPv4 address can be specified for multi-homing purposes with the optional
SMLC occurs.
A second IPv4 address can be specified for multi-homing purposes with the optional
ipv4-address
keyword.
ipv6-address ipv6_address_value1 [ ipv6-address ipv6_address_value2 ]
Specifies the IPv6 address of an interface in the current context through which communication with the E-
SMLC occurs.
A second IPv6 address can be specified for multi-homing purposes with the optional
SMLC occurs.
A second IPv6 address can be specified for multi-homing purposes with the optional
ipv6-address
keyword.
port port_num
Specifies the SCTP port through which communication with the E-SMLC occurs.
port_num
must be an integer from 1 through 65535. Default: 9082.
sctp-template sctp_param_template_name
Associates an existing SCTP Parameter Template with this SCTP connection.
The SCTP template is mandatory for the SLs Service to start.
The SCTP template is mandatory for the SLs Service to start.