Cisco Cisco Packet Data Interworking Function (PDIF)
ACS Ruledef Configuration Mode Commands
▀ rtp pdu-length
▄ Command Line Interface Reference, StarOS Release 18
1062
rtp pdu-length
This command allows you to define rule expressions to match PDU length of RTP packets, equal to the RTP header +
RTP payload.
RTP payload.
Product
ACS
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Ruledef Configuration
active-charging service service_name > ruledef ruledef_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-acs-ruledef)#
Syntax
[ no ] rtp pdu-length operator pdu_length
no
If previously configured, deletes the specified rule expression from the current ruledef.
operator
Specifies how to match.
operator
must be one of the following:
!=
: Does not equal
<=
: Lesser than or equals
=
: Equals
>=
: Greater than or equals
pdu_length
Specifies the RTP PDU length (in bytes) to match.
In 8.1 and later releases,
In 8.1 and later releases,
pdu_length
must be an integer from 1 through 65535.
In 8.0,
pdu_length
must be an integer from 1 through 2000.
Usage
Use this command to define rule expressions to match PDU length (header + payload) of RTP packets in
bytes.
bytes.
Example
The following command defines a rule expression to match an RTP PDU length of
1000
bytes:
rtp pdu-length = 1000