Cisco Cisco Packet Data Interworking Function (PDIF)
ACS x-Header Format Configuration Mode Commands
▀ insert
▄ Command Line Interface Reference, StarOS Release 18
1266
insert
This command allows you to configure the x-header fields to be inserted in HTTP/WSP GET and POST request
packets.
packets.
Important:
This command is license dependent. Please contact your Cisco accounts representative for more
information.
Product
ACS
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > ACS xheader Format Configuration
active-charging service service_name > xheader-format format_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-acs-xheader)#
Syntax
In StarOS 8.1, StarOS 9.0, and later releases:
insert xheader_field_name { string-constant xheader_field_value | variable { bearer {
3gpp { apn | charging-characteristics | charging-id | imei | imsi | qos | rat-type | s-
mcc-mnc | sgsn-address } | acr | congestion-level | customer-id | dest-server-ip-address-
port | ggsn-address | mdn | msisdn-no-cc radius-string | radius-calling-station-id |
session-id | sn-rulebase | subscriber-ip-address | time-of-day | username } [ encrypt ] |
http { host | url } } [ delete-existing ] }
3gpp { apn | charging-characteristics | charging-id | imei | imsi | qos | rat-type | s-
mcc-mnc | sgsn-address } | acr | congestion-level | customer-id | dest-server-ip-address-
port | ggsn-address | mdn | msisdn-no-cc radius-string | radius-calling-station-id |
session-id | sn-rulebase | subscriber-ip-address | time-of-day | username } [ encrypt ] |
http { host | url } } [ delete-existing ] }
no insert xheader_field_name
In StarOS 8.0:
insert xheader_field_name { string-constant xheader_field_value | variable { bearer {
3gpp charging-id | ggsn-address | imsi | radius-string | radius-calling-station-id |
sgsn-address | sn-rulebase | subscriber-ip-address } | http { host | url } }
3gpp charging-id | ggsn-address | imsi | radius-string | radius-calling-station-id |
sgsn-address | sn-rulebase | subscriber-ip-address } | http { host | url } }
no insert xheader_field_name
no
If previously configured, removes the specified x-header field configuration.
xheader_field_name
Specifies the x-header field name to be inserted in the packets.
xheader_field_name
must be an alphanumeric string of 1 through 31 characters.
Up to ten fields can be inserted in each x-header format.