Cisco Cisco Packet Data Interworking Function (PDIF)
APN Configuration Mode Commands
▀ active-charging radio-congestion
▄ Command Line Interface Reference, StarOS Release 18
1296
active-charging radio-congestion
Enables the Congestion Management feature on the Mobile Video Gateway. This command can be configured in either
APN Configuration Mode or Subscriber Configuration Mode.
APN Configuration Mode or Subscriber Configuration Mode.
Product
MVG
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
active-charging radio-congestion policy policy_name
[ default | no ] active-charging radio-congestion policy
default
Sets congestion management to its default value, which is the same as
[ no ]
.
Default: Disabled
no
Deletes the settings and disables congestion management if previously configured.
active-charging radio-congestion policy policy_name
Enables the Congestion Management feature on the Mobile Video Gateway.
policy_name
must be an alphanumeric string of 1 through 63 characters.
Usage
Use this command to enable or disable congestion management on the Mobile Video Gateway at either APN
or subscriber. As congestion management makes use of the Link Monitoring feature, this must also be
enabled along with the congestion monitoring feature.
or subscriber. As congestion management makes use of the Link Monitoring feature, this must also be
enabled along with the congestion monitoring feature.
Example
The following command enables radio congestion for a policy named
test123
for the subscriber:
active-charging radio-congestion policy test123