Cisco Cisco Packet Data Interworking Function (PDIF)
APN Configuration Mode Commands
▀ qos rate-limit
▄ Command Line Interface Reference, StarOS Release 18
1444
qos rate-limit
Configures the action on a subscriber traffic flow that violates or exceeds the peak/committed data rate under traffic
policing functionality.
policing functionality.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
qos rate-limit direction { downlink | uplink } [ qci qci_val ] [ burst-size { bytes |
auto-readjust [ duration dur ] } ] [ exceed-action { drop | lower-ip-precedence |
transmit } [ violate-action { drop | lower-ip-precedence | shape [ transmit-when-buffer-
full ] | transmit } ] ] | [ violate-action { drop | lower-ip-precedence | shape [
transmit-when-buffer-full ] | transmit } [ exceed-action { drop | lower-ip-precedence |
transmit } ] ] +
auto-readjust [ duration dur ] } ] [ exceed-action { drop | lower-ip-precedence |
transmit } [ violate-action { drop | lower-ip-precedence | shape [ transmit-when-buffer-
full ] | transmit } ] ] | [ violate-action { drop | lower-ip-precedence | shape [
transmit-when-buffer-full ] | transmit } [ exceed-action { drop | lower-ip-precedence |
transmit } ] ] +
no qos rate-limit direction { downlink | uplink } [ qci qci_val ]
no
Disables the QoS data rate limit configuration for the APN.
Important:
When no Qos Profile is configured, the system defaults to using the information provided by the
SGSN.
qos rate-limit direction { downlink | uplink }
downlink
: Apply the specified limits and actions to the downlink (the Gn direction).
uplink
: Apply the specified limits and actions to the uplink (the Gi direction).
qci
qci_val
qci_val
is the QoS Class Identifier (QCI) for which the negotiate limit is being set. QCI ranges from 1 to 9.
If no qci-val is configured, it will be handled as an undefined-qci (same as undefined-qos class).
burst-size {
bytes
| auto-readjust [ duration dur ] }
Default: See Usage section for this command.
The burst size allowed, in bytes for peak data rate and committed data rate.
The burst size allowed, in bytes for peak data rate and committed data rate.