Cisco Cisco Packet Data Interworking Function (PDIF)
APN Configuration Mode Commands
▀ timeout idle micro-checkpoint-periodicity
▄ Command Line Interface Reference, StarOS Release 18
1468
timeout idle micro-checkpoint-periodicity
Enables configuration of periodic idle seconds micro checkpoint timer on a per-APN basis.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
timeout idle idle_dur [ micro-checkpoint-periodicity time_in_seconds ]
{ default | no } timeout idle
default
Indicates the timeout specified is to be returned to its default behavior.
no
Disables the timeout idle functionality.
idle_dur
Designates the maximum duration of the session (in seconds). After expiry, the system considers the session
as dormant or idle and terminates the session.
as dormant or idle and terminates the session.
idle_dur
must be an integer value in the range from 0 through 4294967295.
Default: 0
The special value 0 disables the timeout specified.
The special value 0 disables the timeout specified.
micro-checkpoint-periodicity time_in_seconds
Configures periodic idle seconds micro-checkpoint timer on a per-APN basis.
Idle seconds micro-checkpoints are sent at the configured regular intervals to the standby chassis; otherwise,
they are sent at intervals of 10 seconds, which is the default value.
Idle seconds micro-checkpoints are sent at the configured regular intervals to the standby chassis; otherwise,
they are sent at intervals of 10 seconds, which is the default value.
time_in_seconds
must be an integer value in the range from 0 through 4294967295.
Default: 10
Important:
The
micro-checkpoint-periodicity
value should be less than
idle timeout
value.