Cisco Cisco Packet Data Interworking Function (PDIF)
APN Profile Configuration Mode
cc ▀
Command Line Interface Reference, StarOS Release 18 ▄
1501
cc
Configures the charging characteristics (CC) for this APN profile.
Product
SGSN
S-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > APN Profile Configuration
configure > apn-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(apn-profile-profile_name)#
Syntax
cc { local-value-for-scdrs behavior bit_value profile index_bit | prefer { hlr-value-for-
scdrs | local-value-for-scdrs } }
scdrs | local-value-for-scdrs } }
remove cc { local-value-for-scdrs | prefer }
remove
Removes the charging characteristics configuration from this APN profile.
local-value-for-scdrs behavior bit_value profile index_bit
Sets the value of the behavior bits and profile index for the charging characteristics for S-CDRs locally, when
the Home Location Register (HLR) does not provide these values.
If the HLR provides the charging characteristics with behavior bits and profile index, and the operator wants
to ignore what the HLR provides, then specify the
the Home Location Register (HLR) does not provide these values.
If the HLR provides the charging characteristics with behavior bits and profile index, and the operator wants
to ignore what the HLR provides, then specify the
prefer local-value-for-scdrs
keyword with this
command.
bit_value:
must be a hexadecimal value between 0x0 and 0xFFF.
index_bit:
must be an integer from 1 through 15.
Some of the index values are predefined according to 3GPP standard:
1 for hot billing
2 for flat billing
4 for prepaid billing
8 for normal billing
Defaults:
bit_value
= 0x0;
index_bit
= 8
prefer { hlr-value-for-scdrs | local-value-for-scdrs }
Specify what charging characteristic settings the system will use for S-CDRs.