Cisco Cisco Packet Data Interworking Function (PDIF)
AAA Server Group Configuration Mode Commands
▀ radius accounting interim
▄ Command Line Interface Reference, StarOS Release 18
176
radius accounting interim
This command configures the volume of uplink and downlink volume octet counts that trigger RADIUS interim
accounting, and configures the time period between the sending of interim accounting records.
accounting, and configures the time period between the sending of interim accounting records.
Product
GGSN
PDSN
HA
HSGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > AAA Server Group Configuration
configure > context context_name > aaa group group_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-aaa-group)#
Syntax
radius accounting interim { interval interim_interval | volume { downlink bytes uplink
bytes | total bytes | uplink bytes downlink bytes } }
bytes | total bytes | uplink bytes downlink bytes } }
no radius accounting interim volume
no
Disables RADIUS interim accounting.
interval interim_interval
Specifies the time interval, in seconds, between sending interim accounting records.
interim_interval
must be an integer from 50 through 40000000.
volume { downlink bytes uplink bytes | total bytes | uplink bytes downlink bytes
}
}
downlink bytes uplink bytes
: Specifies the downlink to uplink volume limit, in bytes, for RADIUS
Interim accounting.
bytes
must be an integer from 100000 through 4000000000.
total bytes
: Specifies the total volume limit, in bytes, for RADIUS interim accounting.
bytes
must be an
integer from 100000 through 4000000000.
uplink bytes downlink bytes
: Specifies the uplink to downlink volume limit, in bytes, for RADIUS
interim accounting.
bytes
must be an integer from 100000 through 4000000000.
Usage
Use this command to trigger RADIUS interim accounting based on the volume of uplink and downlink bytes
and/or to configure the time interval between the sending of interim accounting records.
and/or to configure the time interval between the sending of interim accounting records.
Example