Cisco Cisco Packet Data Interworking Function (PDIF)
Call Control Profile Configuration Mode
attach access-type ▀
Command Line Interface Reference, StarOS Release 18 ▄
1921
attach access-type
Defines attach-related configuration parameters for this call control profile based on the access-type (GPRS, UMTS, or
both) and location area list.
both) and location area list.
Important:
SGSN only: Before using this command, ensure that the appropriate location area code (LAC)
information has been defined via the
location-area-list
command.
Product
MME
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
attach access-type { gprs | umts } { all | location-area-list instance list_id } {
failure-code code | user-device-release { before-r99 failure code code | r99-or-later
failure code code } }
failure-code code | user-device-release { before-r99 failure code code | r99-or-later
failure code code } }
default attach access-type { eps | gprs | umts } { all | location-area-list instance
list_id } { failure-code | user-device-release { before-r99 failure code | r99-or-later
failure code }
list_id } { failure-code | user-device-release { before-r99 failure code | r99-or-later
failure code }
default
Restores the default values for the for the specified parameter.
access-type type
Defines the type of access to be allowed or restricted.
gprs
umts
all
Instructs the SGSN or MME to apply the command action to all location area lists. Location area lists should
already have been created with the
already have been created with the
location-area-list
command. The location area list consists of one
or more LACs, location area codes, where the MS is when placing the call.