Cisco Cisco Packet Data Interworking Function (PDIF)
Call Control Profile Configuration Mode
attach restrict ▀
Command Line Interface Reference, StarOS Release 18 ▄
1929
attach restrict
Configures the system to restrict attaches based on access type and location areas (either all or specified location area
list) for this call control profile.
list) for this call control profile.
Important:
SGSN only: Before using this command, ensure that the appropriate location area code (LAC)
information has been defined via the
location-area-list
command.
Product
MME
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
[ no ] attach restrict access-type { eps [ emm-cause-code code | imsi-attach-fail [ emm-
cause-code code ] | voice-unsupported [ emm-cause-code code ] ] | gprs | umts } { all |
location-area-list instance list_id }
cause-code code ] | voice-unsupported [ emm-cause-code code ] ] | gprs | umts } { all |
location-area-list instance list_id }
no
Deletes the specified attach configuration.
access-type type
Defines the type of access to be allowed or restricted.
eps
gprs
umts
emm-cause-code code
Specifies the EPS Mobility Management (EMM) cause code to return to the UE:
eps-service-disallowed
eps-service-not-allowed-in-this-plmn
no-suitable-cell-in-tracking-area
plmn-not-allowed
roaming-not-allowed-in-this-tracking-area