Cisco Cisco Packet Data Interworking Function (PDIF)
Call Control Profile Configuration Mode
check-zone-code ▀
Command Line Interface Reference, StarOS Release 18 ▄
1951
check-zone-code
Enables or disables the zone code checking mechanism.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
[ no | remove ] check-zone-code
no
Included with the command, this keyword disables the mechanism.
remove
Included with the command, this keyword causes the removal of the current
check-zone-code
configuration and returns to the SGSN to the default where zone-code checking is enabled.
Usage
Use this command to enable/disable the zone-code checking function.
Example
Disable checking of the zone code:
no check-zone-code