Cisco Cisco Packet Data Interworking Function (PDIF)
Call Control Profile Configuration Mode
▀ diameter-result-code-mapping
▄ Command Line Interface Reference, StarOS Release 18
1956
diameter-result-code-mapping
Maps an EMM (EPS Mobility Management) NAS (Network Access Server) cause code to a Diameter result code.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
diameter-result-code-mapping s6a diameter_result_code mme-emm-cause mme_emm_error_code
remove diameter-result-code-mapping s6a diameter_result_code
remove diameter-result-code-mapping s6a diameter_result_code
Removes the mapping for the specified Diameter result code.
s6a diameter_result_code
Specifies the Diameter result code to which the EMM NAS cause code is mapped.
diameter_result_code
: Specify one of the supported Diameter result codes:
diameter-authorization-rejected
- s6a result code 5003. Default mapped EMM code: “No
suitable cells in tracking area.”
diameter-error-other
- miscellaneous s6a error result code. Default mapped EMM code:
“Network failure.”
diameter-error-rat-not-allowed
- s6a result code 5421. Default mapped EMM code: “No
suitable cells in tracking area.”
diameter-error-roaming-not-allowed
- s6a result code 5004. Default mapped EMM code:
“PLMN not allowed.”
diameter-error-user-unknown
- s6a result code 5001/5030. Default mapped EMM code: “EPS
Service and non-EPS services not allowed.”
diameter-invalid-avp-value
- s6a result code 5004. Default mapped EMM code: “Network
failure.”
diameter-unable-to-comply
- s6a result code 5012. Default mapped EMM code: “Network
failure.”
diameter-unknown-eps-subscription
- s6a result code 5420. Default mapped EMM code: “No
suitable cells in tracking area.”