Cisco Cisco Packet Data Interworking Function (PDIF)
Call Control Profile Configuration Mode
local-cause-code-mapping apn-not-subscribed ▀
Command Line Interface Reference, StarOS Release 18 ▄
2003
local-cause-code-mapping apn-not-subscribed
Gives the operator the option to specify the local cause-code mapping when the UE-requested APN is not subscribed.
Product
MME
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
local-cause-code-mapping apn-not-subscribed esm-cause-code requested-service-option-not-
subscribed
subscribed
remove local-cause-code-mapping apn-not-subscribed
remove
Deletes the local cause code mapping from the configuration.
Usage
The operator can specify "Requested-Option-Not-Subscribed" cause code value #33 will be sent in the Reject
message when the PDN Connectivity Request is rejected because no subscription is found. If the command
option is not configured, then by default the MME uses the cause code value #27 (Unknown or Missing
APN) in standalone PDN Connectivity Reject message when the UE-requested APN is not subscribed.
The new keyword apn-not-subscribed is added to specify the local cause-code mapping when the UE-
requested APN is not subscribed for that subscriber. If cause code mapping for apn-not-subscribed is
explicitly configured with requested-service-option-not-subscribed in either the Call-Control-Profile or
MME-Service configuration mode, then the new code "Requested-Option-Not-Subscribed" (cause-code #33)
will be sent in the Reject message when the PDN Connectivity Request is rejected because no subscription is
found.
message when the PDN Connectivity Request is rejected because no subscription is found. If the command
option is not configured, then by default the MME uses the cause code value #27 (Unknown or Missing
APN) in standalone PDN Connectivity Reject message when the UE-requested APN is not subscribed.
The new keyword apn-not-subscribed is added to specify the local cause-code mapping when the UE-
requested APN is not subscribed for that subscriber. If cause code mapping for apn-not-subscribed is
explicitly configured with requested-service-option-not-subscribed in either the Call-Control-Profile or
MME-Service configuration mode, then the new code "Requested-Option-Not-Subscribed" (cause-code #33)
will be sent in the Reject message when the PDN Connectivity Request is rejected because no subscription is
found.
Example
The following instructs the MME to use cause code #33 ("Requested-Option-Not-Subscribed") in place of the
default #27 (Unknown or Missing APN):
default #27 (Unknown or Missing APN):
local-cause-code-mapping apn-not-subscribed esm-cause-code requested-
service-option-not-subscribed
service-option-not-subscribed