Cisco Cisco Packet Data Interworking Function (PDIF)
Call Control Profile Configuration Mode
pdp-activate allow ▀
Command Line Interface Reference, StarOS Release 18 ▄
2053
pdp-activate allow
Configures the system to allow the PDP context activation based on the type of access technology.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
[ no ] pdp-activate allow access-type { grps | umts } location-area-list instance
instance
instance
no
Removes the configured permission to create PDP context on request of PDP context activation from MS for
an access type.
an access type.
access-type { grps | umts }
Specifies the access technology type for PDP context activation.
gprs
: Enables access type as GPRS.
umts
: Enables access type as UMTS.
location-area-list instance instance
Specifies the location area instance to create PDP context.
instance
must be an integer from 1 through 5. The value must be an already defined instance of a location
area code (LAC) list created via the
location-area-list
command.
Usage
Use this command to configure this call control profile to allow GPRS/UMTS access through PDP context
activation request from MS.
activation request from MS.
Example
The following command configures the system to allow the PDP context activation for GPRS access type
with location area list instance
with location area list instance
2
:
pdp-activate allow access-type gprs location-area-list instance 2