Cisco Cisco Packet Data Interworking Function (PDIF)
Card Configuration Mode Commands
▀ redundant with
▄ Command Line Interface Reference, StarOS Release 18
2178
redundant with
Enables side-by-side (SBS) redundancy for XGLCs. (ASR 5000 only)
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Card Configuration
configure > card card_number
Entering the above command sequence results in the following prompt:
[local]host_name(config-card- slot_number)#
Syntax
redundant with card_number
card_number
Identifies the neighboring top slot number of the card to pair with the XGLC being configured.
card_number
is an integer between 1 and 48.
Important:
Attempting to use this command with any card other than an XGLC takes the card offline.
Usage
Use this command during configuration to identify the slot holding the XGLC card that will be used to
provide redundancy to the XGLC you are configuring. Entering this command enables SBS redundancy when
the two XGLCs occupy two upper (top) slots in a chassis.
provide redundancy to the XGLC you are configuring. Entering this command enables SBS redundancy when
the two XGLCs occupy two upper (top) slots in a chassis.
Example
Pair the card in slot 30 with the card being configured:
redundant with 30