Cisco Cisco Packet Data Interworking Function (PDIF)
Card Configuration Mode Commands
shutdown ▀
Command Line Interface Reference, StarOS Release 18 ▄
2181
shutdown
Configures a card for active service or terminates all processes on the card.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Card Configuration
configure > card card_number
Entering the above command sequence results in the following prompt:
[local]host_name(config-card- slot_number)#
Syntax
[ no ] shutdown
no
no shutdown
enables the card.
Enter only the
shutdown
keyword to shut the card down.
Usage
Shut down a card to remove it from service or to enable a card to put it into service.
Important:
Do not use this command to remove a card from service for maintenance. Use the command
card
halt
to remove a card for service to avoid changing or deleting the active-mode configuration. See the Exec Mode
chapter.
Important:
Not supported on all platforms
Example
The following command shuts down the card:
shutdown
The following command switches the card to online:
no shutdown