Cisco Cisco Packet Data Interworking Function (PDIF)
Channelized Port Configuration Mode Commands
▀ alarm-disable
▄ Command Line Interface Reference, StarOS Release 18
2194
alarm-disable
Entering this command disables the alarm detection for designated sets of alarms.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Channelized Port Configuration
configure > port channelized slot_number/port_number
Entering the above command sequence results in the following prompt:
[local]host_name(config-port-slot_number/port_number)#
Syntax
alarm-disable { all | ds1-e1 | none | sonet-sdh }
[ no | default ] alarm-disable
no
Deletes the disable configuration.
default
Returns the settings for disabling alarms to the system default.
all
Disables detection of all SONET/SDH and DS1/E1 alarms.
ds1-e1
Disables detection of the DS1/E1 alarms.
none
None of the alarm detection is disabled so that all DS1/E1 and SONET/SDH alarms are detected.
sonet-sdh
Disables detection of SONE/SDH alarms.
Usage
Configure selected alarm detection for the port.
Example
Enter the following command to enable DS1/E1 and SONET/SDH alarm detection.
alarm-disable none