Cisco Cisco Packet Data Interworking Function (PDIF)
Channelized Port Configuration Mode Commands
▀ hopath-sdsf
▄ Command Line Interface Reference, StarOS Release 18
2204
hopath-sdsf
Configures the high-order path for degrade/signal failure (SDSF) bit error rate (BER) thresholds.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
hopath-sdsf hopath_value
hopath_value
0: Disabled
1 -1.E-03
2 - 1.E-04
3 - 1.E-05
4 - 1.E-06
5 - 1.E-07
6 - 1.E-08
7 - 1.E-09
8 - 1.E-10
Usage
Sets a standard option for the high-order path for SDSF.
The SD is kept at a value of 100 erroredBits/sec less than the corresponding value of the SF. So if the SD
threshold is configured at 1 error in every 100000 bits/sec, then the SF threshold automatically becomes 1
error in every 1000 bits/sec.
The SD is kept at a value of 100 erroredBits/sec less than the corresponding value of the SF. So if the SD
threshold is configured at 1 error in every 100000 bits/sec, then the SF threshold automatically becomes 1
error in every 1000 bits/sec.
Example
hopath-sdsf 1