Cisco Cisco Packet Data Interworking Function (PDIF)
Context Configuration Mode Commands A-D
cscf diameter-selection ▀
Command Line Interface Reference, StarOS Release 18 ▄
2373
cscf diameter-selection
Creates a CDF or HSS diameter selection table and enters the CSCF Diameter Selection Configuration Mode.
Product
SCM (S-CSCF)
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
[ no ] cscf diameter-selection type { cdf | hss } [ -noconfirm ]
no
Removes the specified CDF or HSS diameter selection table.
type { cdf | hss }
Specifies the type of diameter selection table.
cdf
: Diameter selection table for selecting CDF server
hss
: Diameter selection table for selecting HSS server
-noconfirm
Executes the command without any additional prompt and confirmation from the user.
Usage
Use this command to cause the system to enter the Diameter Selection Configuration Mode where parameters
are configured for the diameter group.
are configured for the diameter group.
Important:
When HSS table has entries, this criteria is always applied for HSS server selection. CDF server
selection, however, can be enabled or disabled for a given access type.
Entering this command results in the following prompt:
[context_name]hostname(config-cscf-diameter-selection)#
Diameter Selection Configuration Mode commands are defined in the CSCF Diameter Selection
Configuration Mode Commands chapter.
Use this command when configuring the S-CSCF.
Configuration Mode Commands chapter.
Use this command when configuring the S-CSCF.
Example