Cisco Cisco Packet Data Interworking Function (PDIF)
Context Configuration Mode Commands A-D
diameter sctp ▀
Command Line Interface Reference, StarOS Release 18 ▄
2423
diameter sctp
This command configures Diameter SCTP parameters for all Diameter endpoints within the context. In 12.2 and later
releases, this command is obsolete and replaced with
releases, this command is obsolete and replaced with
associate sctp-parameters-template
command in the
Diameter Endpoint Configuration Mode.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
diameter sctp { hearbeat-interval interval | path max-retransmissions retransmissions }
default diameter sctp { heartbeat-interval | path max-retransmissions }
default
Configures this command with the default settings.
heartbeat-interval
: Sets the heartbeat interval to the default value.
path max-retransmissions
: Sets the SCTP path maximum retransmissions to the default value.
hearbeat-interval interval
Specifies the time interval between heartbeat chunks sent to a destination transport address in seconds.
interval
must be an integer from 1 through 255.
Default: 30 seconds
path max-retransmissions retransmissions
Specifies the maximum number of consecutive retransmissions over a destination transport address of a peer
endpoint before it is marked as inactive.
endpoint before it is marked as inactive.
retransmissions
must be an integer from 1 through 10.
Default: 10
Usage
Use this command to configure Diameter SCTP parameters for all Diameter endpoints within the context.
Example
The following command configures the heartbeat interval to
60
seconds:
diameter sctp hearbeat-interval 60