Cisco Cisco Packet Data Interworking Function (PDIF)
Accounting Policy Configuration Mode Commands
max-containers ▀
Command Line Interface Reference, StarOS Release 18 ▄
243
max-containers
Control the number of containers in an ACR message.
Product
GGSN
HSGW
P-GW
S-GW
SAEGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > Accounting Policy Configuration
configure > context context_name > policy accounting policy_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-accounting-policy)#
Syntax
max-containers { containers | fill-buffer }
default max-containers
default
Cache containers until buffer is filled.
containers
System can send any value equal or less than the maximum number of containers selected. The number of
containers that can be sent can be dynamically selected by the system, but it should not cross the limit of
containers in any message.
containers that can be sent can be dynamically selected by the system, but it should not cross the limit of
containers in any message.
containers
must be in integer from 1 to 30.
fill-buffer
Cache containers until buffer is filled.
Usage
Use this command to control the number of containers before an interim ACR message is triggered.
Example
The following command sets a maximum of
20
containers in an ACR message:
max-containers 20