Cisco Cisco Packet Data Interworking Function (PDIF)
Context Configuration Mode Commands I-M
ipv6 access-group ▀
Command Line Interface Reference, StarOS Release 18 ▄
2595
ipv6 access-group
Configures the IPv6 Access group.
Product
PDSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
ipv6 access-group group name { priority_value }
group_name
Specifies the name of the access group as an alphanumeric string of 1 through 79 characters.
priority_value
Specifies the priority of the access group. 0 is the highest priority. If
priority_value
is not specified the
priority is set to 0.
priority_value
must be an integer from 0 through 4294967295. Default: 0
If access groups in the list have the same priority, the last one entered is used first.
Usage
Use this command to specify IPv6 access group name and priority. Use a lower value to indicate a higher
priority for the group.
priority for the group.
Example
ipv6 access-group group_1