Cisco Cisco Packet Data Interworking Function (PDIF)
Context Configuration Mode Commands N-R
▀ radius strip-domain
▄ Command Line Interface Reference, StarOS Release 18
2756
radius strip-domain
This command configures the stripping of the domain from the user name prior to authentication or accounting.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
radius strip-domain { authentication-only | accounting-only }
no radius strip-domain
no
Removes the RADIUS strip-domain configuration.
authentication-only
Specifies that the domain must be stripped from the user name prior to authentication.
accounting-only
Specifies that the domain must be stripped from the user name prior to accounting.
Usage
Use this command to configure the stripping of domain from the user name prior to authentication or
accounting.
By default, strip-domain configuration will be applied to both authentication and accounting messages, if
configured. When the argument
accounting.
By default, strip-domain configuration will be applied to both authentication and accounting messages, if
configured. When the argument
authentication-only
or
accounting-only
is present,
strip-domain
is applied only to the specified RADIUS message types.
Example
The following command configures the stripping of domain from the user name prior to authentication:
radius strip-domain authentication-only