Cisco Cisco Packet Data Interworking Function (PDIF)
Crypto Map IKEv2-IPv6 Configuration Mode Commands
▀ payload
▄ Command Line Interface Reference, StarOS Release 18
2962
payload
Creates a new, or specifies an existing, crypto template payload and enters the Crypto Template Payload Configuration
Mode.
Mode.
Product
ePDG
FA
GGSN
HA
HeNBGW
HNBGW
HSGW
MME
P-GW
PDSN
S-GW
SAEGW
SCM
SecGW
SGSN
Privilege
Security Administrator
Syntax
payload name match ipv6
no payload name
payload
name
Specifies the name of a new or existing crypto template payload as an alphanumeric string of 1 through 127
characters.
characters.
match ipv6
Filters IPSec IPv6 Child Security Association creation requests for subscriber calls using this payload.
Further filtering can be performed by applying the following:
Further filtering can be performed by applying the following:
Usage
Use this command to create a new or enter an existing crypto template payload. The payload mechanism is a
means of associating parameters for the Security Association (SA) being negotiated.
Two payloads are required: one each for MIP and IKEv2. The first payload is used for establishing the initial
Child SA Tunnel Inner Address (TIA) which will be torn down. The second payload is used for establishing
means of associating parameters for the Security Association (SA) being negotiated.
Two payloads are required: one each for MIP and IKEv2. The first payload is used for establishing the initial
Child SA Tunnel Inner Address (TIA) which will be torn down. The second payload is used for establishing