Cisco Cisco Packet Data Interworking Function (PDIF)
Command Line Interface Reference, StarOS Release 18 ▄
3053
Chapter 69
Crypto Template IKEv2-Dynamic Payload Configuration
Mode Commands
The Crypto Template IKEv2-Dynamic Payload Configuration Mode is used to assign the correct IPSec transform-set
from a list of up to four different transform-sets, and to assign Mobile IP addresses. There should be two payloads
configured. The first must have a dynamic addressing scheme from which the ChildSA gets a TIA address. The second
payload supplies the ChildSA with a HoA, which is the default setting for
from a list of up to four different transform-sets, and to assign Mobile IP addresses. There should be two payloads
configured. The first must have a dynamic addressing scheme from which the ChildSA gets a TIA address. The second
payload supplies the ChildSA with a HoA, which is the default setting for
ip-address-allocation
.
Mode
Exec > Global Configuration > Context Configuration > Crypto Template Configuration > Crypto Template IKEv2-
Dynamic Payload Configuration
Dynamic Payload Configuration
configure > context context_name > crypto template template_name ikev2-dynamic > payload
payload_name match childsa
payload_name match childsa
match
{ any | ipv4 | ipv6 }
Entering the above command sequence results in the following prompt:
[context_name]host_name(cfg-crypto-tmpl-ikev2-tunnel-payload)#
Important:
The commands or keywords/variables that are available are dependent on platform type, product
version, and installed license(s).