Cisco Cisco Packet Data Interworking Function (PDIF)
CSCF Service Configuration Mode Commands
custom cdf-selection ▀
Command Line Interface Reference, StarOS Release 18 ▄
3303
custom cdf-selection
Enables using the CDF selected during registration for “VT” calls. For other calls, the CDF in default AAA-Group is
used. Default is disabled.
used. Default is disabled.
Product
SCM (S-CSCF)
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF Service Configuration
configure > context context_name > cscf service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-cscf-service)#
Syntax
[ no ] custom cdf-selection
no
When disabled, the CDF selected during registration shall be used for all calls.
Usage
Use this command to apply prefix-based CDF selection logic for VT calls only. For non-VT calls, CDF in
default AAA Group is used.
When disabled, prefix-based CDF selection logic is applied for all calls.
default AAA Group is used.
When disabled, prefix-based CDF selection logic is applied for all calls.